Conventional Marine Enamel Paint
SPECIFICATIONS
| SPECIFICATIONS | DETAILS | SPECIFICATIONS | DETAILS |
|---|---|---|---|
| Pigment | Selected anticorrosive pigment of good light fastness | DRYING PROPERTIES | at tropical ambient temperature of 30°C |
| Binder | Modified alkyd resin | Touch Dry | 45-60 minutes |
| Type | Single Pack | Hard Dry | 14-16 hours |
| Colour | As per Classic synthetic enamel shade card | Over-coating Interval | 24 hours |
| Finish | Highly glossy | Surface condition | Clean dry and undamaged previous coat |
| Viscosity (ASTM D200) | 120 ± 10 sec. in ford cup-3 at 30°C | ||
| Thinner | Thinner T-6 | Brush | Stir well before use. The paint comes to you ready-house. However, if necessary thin up to 5-10% by volume with thinner T-1 |
| Storage | Air Spray | Recommended Thinner T-1 Volume of thinner 15-20% | |
| Storage | Always store in cool and dry place. Flammable liquid, should be kept away from sparks and flame | Cleaning | Clean all equipment with Thinner T-1 or White Spirit immediately after use |
Reviews
There are no reviews yet.